Home
AllMusicListings
AllMusicTalk
MusicNews
Community
Blogs
AllMusicPages
AllMusicBookmarks
AllMusicFun
Music Auctions
Music Apparel
Music Store
|
Articles and Studies (94) Categories:
Sites:
» A Comparative Study on the Quality Control of Jute Yarn Conventional Drawing Method vs Modern Drawing Method
Technical paper presenting the results of a comparative study of the effectiveness of quality control in mono-head high-speed and the traditional push-bar type drawing systems. Authors: A.K.M. Mahabubuzzaman and others. http://docsdrive.com/pdfs/ansinet/ajps/2002/646-647.pdf » A Micromechanical Model for Blended Yarns with Fragmented Low-Elongation Fibers
Technical paper presenting a micro-mechanical model for the interaction between fragmented low elongation-to-break fibers (LE) and high elongation-to-break fibers (HE) in blended yarns, for the evaluation of the load-extension behaviour of such yarns. Aut http://www.tx.ncsu.edu/jtatm/volume2issue1/articles/godfrey/godfreycomplete.pdf » A Study of the Nucleation Effect of Pigment Dyes on the Microstructure of Mass Dyed Bulked Continuous Filament Polypropylene
Technical paper reporting the results of a study on the nucleation effect, tenacity and thermal shrinkage which six pigment dyes have on the microstructure of mass dyed polypropylene BCF yarns. Authors: Hossein Tavanai and others. http://journal.ippi.ac.ir/manuscripts/ipjE05140307.pdf » Abrasion Characteristics of Ring Spun and Open-end Spun Yarns
Master of Science thesis describing an experimental investigation into the difference in abrasive behaviour of cotton yarn spun with the ring and open-end spinning technologies using a continuous tension transport (CTT) tester. Author: Jeremy Jones. http://www.lib.ncsu.edu/theses/available/etd-20011115-182006/unrestricted/etd.pdf » Analysis and Enhancement of Carding and Spinning
Extensive paper describing a research project at the National Textile Center, aiming to enhance the fundamental understanding of carding and spinning, and develop new tools to shorten the sequence for staple yarn processing. Project leader: Y. Wang. http://www.ntcresearch.org/pdf-rpts/AnRp02/F01-GT06-A2.pdf » Applicability of Flax and Hemp as Raw Materials for Production of Cotton-like Fibers and Blended Yarns in Poland
Review of basic research and new concepts in the processing of flax and hemp fiber focused on the production of cotton and wool like fibers and yarns. Authors: Waldemar Cierpucha and others. http://www.fibtex.lodz.pl/47_06_13.pdf » Blended Yarns with a Content of Biological Active Fibers
Technical paper about research into the development of a technology aimed at manufacturing yarns from antimicrobial and antifungal fibers for apparel fabrics. Authors: Tadeusz Jackowski and others. http://www.fibtex.lodz.pl/45_08_19.pdf » Buckling of Fibers and Yarns within Ropes and other Fiber Assemblies
Extensive technical paper about the effect of buckling of fibers in yarns and ropes under tension, resulting in failure by axial compression fatigue after repeated cycling. Authors: R.E. Hobbs and others. http://www.tensiontech.com/papers/papers/buckling_fibres_yarns/buckling_fibres_yarns.pdf » Carpet Yarn Finishing and Chemical Treatments
Introduction to carpet yarn spinning methods and the wool yarn scouring process. From Wools of New Zealand. http://www.canesis.com/Documents/Yarn_Scouring.pdf » Coal Acids - A Potential Warp Size for Continuous Filament Yarns
Working paper summarizing the results of an evaluation of a mixture of water soluble aromatic polycarboxylic acids produced by caustic oxygen oxydation of coal for its potential as warp sizing agent for continuous filament yarns. Authors: Keith B. Bozer a http://www.anl.gov/PCS/acsfuel/preprint%20archive/Files/03_3_ATLANTIC%20CITY_09-59_0101.pdf » Comparative Study of Quality Parameters of Knitted Fabric from Air-jet and Ring Spun Yarn
Technical paper presenting research into the mechanical properties of knitted fabrics made from air-jet and ring spun yarns in various blend ratios of cotton and polyester. Authors: Babar Shahbaz and others. http://scialert.net/pdfs/jas/2005/277-280.pdf » Comparing the Structure of Rabbit Hair-Cotton Blended Rotor and Ring Spun Yarns
Technical paper presenting a comparative study of the differences in fiber distribution in various ratios of rabbit hair and cotton blended yarns spun with rotor and ring spinning technologies. Authors: Lijun Qu and others. http://www.rjta.org/download.php?paper=1&paper_id=04_1_04 » Comparison of Different Theoretical Models of Fancy Yarns
Technical paper presenting an experimental comparison of fancy yarns of various structures, using two different theoretical models for predicting the coil length of the binder yarns. Authors: S. Perulyté and D. Petrulis. http://internet.ktu.lt/lt/mokslas/zurnalai/medz/pdf/medz0-76/19%20Petrulytes%2089-92.pdf » Conductive Yarn
Technical paper describing methods for combining various types of conductive fibers with wool carpet pile, and techniques to create conductive carpet backing. From the Wool Research Organization of New Zealand. http://www.canesis.com/Documents/Yarn_Conductive_yarns.pdf » Control of Yarn Inventory for a Cotton Spinning Plant. Part I
Part I of a series of papers about yarn inventory control, presenting a process control based methodology attempting to control the inventory at a specified level using separate proportional control equations for each yarn type. Authors: Russel E. King an http://www.tx.ncsu.edu/jtatm/volume2issue2/articles/thoney/thoney1_full.pdf » Control of Yarn Inventory for a Cotton Spinning Plant. Part II
Part II of a series of papers about yarn inventory control, comparing the performance process control based methodology and the traditional min/max system in situations in which the demand from period to period exhibits correlation. Authors: Russel E. Kin http://www.tx.ncsu.edu/jtatm/volume2issue2/articles/thoney/thoney2_full.pdf » Development of Characterization Methodologies of Fiber Surface Characteristics: Surface/Process Analysis
Technical paper presenting a study of the friction behaviour of as-spun yarns as part of a larger research effort aimed at developing methodologies which can be utilised for fiber surface characterization. Authors: Yehia E. El Mogahzy and others. http://www.p2pays.org/ref/08/07066.pdf » Developments in Spinning
Short 2003 overview of yarn formation technologies, including descriptions of the ring, open-end or rotor, vortex and jet spinning techniques. Author: William Oxenham. http://landofcotton.com/fc/files/spinsys.pdf » Effect of Spindle Diameter and Spindle Working period on the Properties of 100% Viscose MVS Yarns
Technical paper presenting the results of a study on the effects of various spindle diameters and working periods on the properties of viscose MVS yarns, evaluated on the basis of unevenness, hairiness, elongation at break, tenacity and work-of-break (B-w http://www.fibtex.lodz.pl/68_07_17.pdf » Effect of Yarn Parameters on the Knittablity of Glass Ply Yarn.
Technical paper investigating the knittablity of glass ply yarns of different parameters by testing their mechanical performance using a self-developed knit simulating apparatus. Authors: Xiao-ming Liua and others. http://www.fibtex.lodz.pl/70_15_90.pdf » How to Assess Your Mill's Productivity?
Technical paper, presenting a detailed study by the South India Textile Research Association on measures and methods allowing the assessment of the productivity of yarn spinning mills. Authors: R. Rajamanickam and others. http://www.sitra.org.in/image/2007-01-19@03-58-37_Howtoass.pdf » Impact of Sizing on Physico-Mechanical Properties of Yarn
Technical paper examining breaking force, elongation at break and abrasion resistance before and after the sizing of yarns spun in five different spinning mills. Authors: Stana Kovacevic and Zeljko Penava. http://www.fibtex.lodz.pl/48_10_32.pdf » Mechanical Properties and a Physical-Chemical Analysis of Acetate Yarns
Technical paper about an investigation of the properties of yarns from cellulose acetate fibers derived from cotton linters or wood pulp cellulose, and manufactured by different commercial yarn spinners. Authors: R. Pociene and others. http://internet.ktu.lt/lt/mokslas/zurnalai/medz/pdf/medz0-76/16%20Pocienes%2075-79.pdf » Neps, Seed-Coat Fragments, and Non-Seed Impurities in Processed Cotton
Technical paper presenting the results of a study on the effect of mechanical processing procedures on the presence of defects in cotton by examining samples of four different ginning and lint cleaning combinations, collected after carding and combing. Au http://www.cotton.org/journal/2001-05/1/upload/jcs05-053.pdf » Periodic and Chaotic Motion in Sirofil Yarn Spinning
Technical paper about the establishment of a dynamic model for two-strand yarn processing through approximating the oscillating frequencies of sirofil spinning in horizontal and vertical directions, enabling the analysis of the stability and chaotic chara http://www.fibtex.lodz.pl/67_09_27.pdf » Processing Wool. Part I
First part of a fact sheet on wool processing, dealing with shearing, grading, washing, scouring, blending, dyeing and carding of wool fibers. http://bms.seregon.com/repository/wool/scm/uploads/processingpart1.pdf » Processing Wool. Part II
Second part of a factsheet on wool processing, dealing with spinning, weaving and knitting, fulling and finishing, and the various chemical finishes in use with the industry. http://bms.seregon.com/repository/wool/scm/uploads/processingpart2.pdf » Properties of Close Packing of Filaments in Yarn
Study analysing a hypothetical model of the close cross-sectional structure of yarn, and some peculiarities of close packing of yarn. Authors: Donatas Petrulis and Salvinija Petrolyte. http://www.fibtex.lodz.pl/40_08_16.pdf » Quality of Yarns Spun Using Ring, Compact and Rotor Spinning Machines as a Function of Selected Spinning Process Parameters
Technical paper presenting an analysis of the quality parameters of carded and combed medium staple cotton yarns of various linear densities manufactured using the ring, compact and rotor spinning technologies. Authors: Lidia Jackowska-Strumillo and other http://www.fibtex.lodz.pl/60_08_24.pdf » Quantitative Grading of Spun Yarns for Appearance
Technical paper reporting an objective and quantitative method for grading spun yarn appearance derived from optical yarn diameter measurements. Authors: Young K. Kim and others. http://www.jstage.jst.go.jp/article/jte/52/1/13/_pdf » Size Effect of Interlacer
Technical paper reporting on experiments conducted in order to exmine the size effect of an interlacer, using several interlacers with different diameters of yarn duct and air-jet nozzle. Authors: Yoshiyuki Iemoto and others. http://www.journalarchive.jst.go.jp/jnlpdf.php?cdjournal=jte1955&cdvol=45&noissue=3&startpage=71&lang=en&from=jnlabstract » Size Lubrication Methods for Air-Jet Spun and Ring-Spun Warp Yarns
Comparative study addressing the effect of size concentration and lubrication on yarn characteristics and weaving performance of conventional ring spun and air-jet spun polyester and cotton blended yarns. Authors: Howard L. Thomas Jr. and James M. Zeiba. http://www.cotton.org/journal/2000-04/2/upload/jcs04-112.pdf » Spinning Technology Guide
An explanation of the yarn spinning process, from fiber opening and blending to the final yarn testing procedures. Author: R. Velmurugan. http://textiletechnology.bravehost.com/ » Steps in Processing Wool into Yarn
Short descriptions of fleece skirting, and wool washing, picking, carding, roving, spinning and finishing processes. From the Blackberry Ridge Woolen Mill web site. http://www.blackberry-ridge.com/prosdscr.htm » Stores Consumption in Spinning Mills
Study on the periodical replacement and consumption rate of consumable stores in Indian yarn spinning mills, focusing on top roller cots, aprons, travellers and spindle tapes, and gears, bearings, belts and lubricants. Published in Sitra Focus. http://www.sitra.org.in/image/2007-02-07@01-22-13_Focus_Stores.pdf » Studies on Cottonized Jute Composite Structures Spun on Ring, Rotor and Air-Jet Spinning Systems
Technical paper presenting a study investigating the spinning performance for rotating ratios of jute and its blends with cotton, viscose and polyester to improve the tensile behaviour of composite structures of cottonized jute blended yarns spun on ring, http://www.saskflax.com/documents/fb_papers/58_Nawaz.pdf » Study about the Interactions Between Melange Yarn Properties and Fiber Damage
Technical paper presenting a study about cotton fiber damage and its effect on the properties of ring and open-end rotor spun greige and dyed melange yarns. Authors: A.A. Gharehaghaji and others. http://dspace.lib.fcu.edu.tw/bitstream/2377/3955/1/ce05atc902007000078.pdf » Textile Articles
Collection of research studies, articles, projects and trend analysis related to natural and man-made fibers, yarn spinning technologies, and textile manufacturing, processing and finishing. http://textilearticles.co.cc/ » Textile Link Articles
Collection of articles on yarn spinning, knitting, fiber and yarn terms and definitions, and wool breeds and grades. Author: Rosemary Brock. http://www.textilelinks.com/author/index.html » The Application of Untoxic Polymers at Sizing and Bleaching Textile Processes
Technical paper about the use of untoxic and water soluble polymers in cotton yarn sizing and bleaching operations. Authors: Dragan M. Djordjevic and others. http://facta.junis.ni.ac.rs/walep/walep99/walep99-10.pdf » The Colorimetric Measurement of Melánge Woollen Yarns: A New Optical Tool
Technical paper introducing a novel method for accurate colorimetric measurement of melánge woollen yarns using an optical system of flat scanner acquisition combined with colorimetric techniques. From the Journal of Engineering ans Applied Sciences. Aut http://medwelljournals.com/fulltext/jeas/2007/877-881.pdf » The Effect of Knitting and Wearing Conditions on the Tensile Characteristics of Blended Yarns
Technical paper analysing the effects of the knitting process, washing procedures and tumbling on the tensile characteristics of blended yarns constructed from wool, cotton and acrylic. Authors: B. Tvarijonaviciené and others. http://internet.ktu.lt/lt/mokslas/zurnalai/medz/pdf/medz0-76/17%20Tvarijonaviciene%2080-84.pdf » The Influence of Spun Yarns on Needle Life
Technical brochure about the influence of yarn finishes and fiber contamination during yarn spinning, on the wear of knitting needles. From Groz-Beckert KG. http://www.groz-beckert.de/website/media/en/media_master_699_low.pdf » The Making of Fiber Glass Yarns
Description of the manufacturing process of textile yarns from continuous glass fibers. Detailed production flow chart, clickable for additional information. From PPG Industries. http://www.ppg.com/fgs_main/esm.htm » The Structure and Properties of Vortex and Compact Spun Yarns
Doctor of Philosophy dissertation about the identification of the structural differences which can be used to explain the properties of air vortex spun and compact ring spun yarns. Author: Guldemet Basal. http://www.lib.ncsu.edu/theses/available/etd-03172003-132411/unrestricted/etd.pdf » The Turkish Textile Industry
Extensive article about the history, present state and future development of the Turkish yarn making industry. From the Istanbul Textile and Clothing Association. http://www.itkib.org.tr/english/about/sectors/textile/textile_info.pdf » Translation of Structure and Strength Properties of Different Spun Yarns on Fabric Strength
Technical paper presenting a study of the influence of the structure and physical properties of yarns spun with different spinning technologies, on the tensile strength of fabrics woven with said yarns. Authors: S.M. Ishtiaque and others. http://www.ft.tul.cz/science/konference/indoczech-conference/conference_proceedings/abstract/India_01.pdf » Useful Criteria for Comparing Strength of Yarns
Short comparative study of the effects of various amounts of twists introduced to yarns in the spinning process. Author: Dr. H.R. Sheikh. http://www.webtex.com.br/arquivosPDF/comparing_strength.pdf » What's That Stuff?
Short article on the history, development and chemical structure of spandex, published in Chemical and Engineering News. Author: Marc Reisch. http://pubs.acs.org/cen/whatstuff/stuff/7707scitek4.html » Wool Works FAQ on Yarns
List of frequently asked consumer questions about knitting yarns. Information about animal, plant and man-made fibers, yarn constructions and manufacturing processes.Author: Wendy Chatley Green. http://www.woolworks.org/fibers.html » Woolen and Worsted Explained
Brief explanation of the woolen and worsted yarn spinning technologies. Author: Lady Siobhan nocDhuinnshleibhe. http://kws.atlantia.sca.org/Woolen_vs_Worsted_Explained.pdf » Worsted Spinning
Description of the technology and dificulties of the worsted spinning process and a review of the latest developments. From Australian Wool Innovation, Ltd. http://www.merinoinnovation.com.au/wps/wcm/resources/file/eb1c730d6fec5ec/worsted_spinning.pdf » Yarn Preparation
Feature article about the various processes spun and filament yarns are subjected to prior to weaving and knitting into textile fabrics. http://www.techno-preneur.net/information-desk/sciencetech-magazine/2006/sep06/Yarn_preparation.pdf » Yarn Strength Dependence on Test Length
Technical paper about the evaluation of yarn strength changes, and the auto-correlation functions of the strength of short yarn links in standard yarn breakage tests. Author: Pavol Lizak. http://www.fibtex.lodz.pl/38_08_32.pdf This category needs an editor
Last Updated: 2009-08-19 01:32:15
The content of this directory is based on the Open Directory and has been modified by AllMusicSearch.com editors |